Audiovox automobile accessories APS 400 Manual

PDF Manuals
24 Pages English

Audiovox automobile accessories APS 400
Page 1
SELECTABLE FEATURES
Note : The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be
certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
Wire Loop Selectable Features :
Wire Color Closed Loop Cut Loop
Gray Loop Custom Code Manual Override Valet Switch Manual Override
Green Loop Voltage Sense Hardwire
Note : When both Passive Arming and Voltage Sensing are selected, you must hardwire the driver’s door pin switch in order
to begin the passive arming sequence.
RF Programmable Features :
Feature Selection 1 Chirp 2 Chirps Default
First 1 Second Door Locks 3.5 Second Door Locks 1 Second
Second Auto Lock On Auto Lock Off Auto Lock Off
Third Auto Unlock On Auto Unlock Off Auto Unlock Off
Fourth No Function No Function —————————-
Fifth Passive Door Locks Active Door Locks Passive Locks
Sixth Passive Arming Active Arming Active Arming
To program these selectable features;
Action System Response
Turn ignition on No response
Flip valet switch on then off 3 times 1 Chirp - LED 1 flash
Within 3 seconds, turn ignition Off Short chirp, then long chirp
First Then On 1 chirp = 1 second door locks
Press transmitter button 1 to change 2 chirps = 3.5 second door locks
or
Second Flip valet switch on then off 2 chirps = auto locks off
Press tranmitter button 1 to change 1 chirp = auto locks on
or
Third Flip valet switch on then off 2 chirps = auto unlock off
Press transmitter button 1 to change 1 chirp = auto unlock on
or
Fourth Flip valet switch on then off 1 chirp = No Function
Press transmitter button 1 to change 2 chirps = No Function
or
Fifth Flip valet switch on then off 1 chirp = passive locks
Press transmitter button 1 to change 2 chirps = active locks
or
Sixth Flip valet switch on then off 1 chirp = passive arming
Press transmitter button 1 to change 2 chirps = active arming
or
Flip valet switch on then off Exit program mode
or
Turn ignition key off Exit program mode
Note : Once you enter the feature programming mode, do not allow more than 15 seconds to pass between steps, or the
programming will be terminated.
Model APS 400
Installation Manual
Related Manuals for Audiovox automobile accessories APS 400
50-0312x SERIES
Audiovox automobile accessories 50-0312x SERIES

For automobile accessories (5 Pages)
50-0301x-019 SERIES
Audiovox automobile accessories 50-0301x-019 SERIES

For automobile accessories (5 Pages)
50-0301x-002 SERIES
Audiovox automobile accessories 50-0301x-002 SERIES

For automobile accessories (5 Pages)
50-0286x-019 Series
Audiovox automobile accessories 50-0286x-019 Series

For automobile accessories (6 Pages)
50-0301x-014 SERIES
Audiovox automobile accessories 50-0301x-014 SERIES

For automobile accessories (5 Pages)
Automobile Accessories
Audiovox automobile accessories Automobile Accessories

For automobile accessories (20 Pages)
AS-9631
Audiovox automobile accessories AS-9631

For automobile accessories (1 Pages)
APS 800a
Audiovox automobile accessories APS 800a

For automobile accessories (8 Pages)
APS-25KB
Audiovox automobile accessories APS-25KB

For automobile accessories (6 Pages)
AS-RS
Audiovox automobile accessories AS-RS

For automobile accessories (8 Pages)
CCS-100
Audiovox automobile accessories CCS-100

For automobile accessories (19 Pages)
PRO-OE3C
Audiovox automobile accessories PRO-OE3C

For automobile accessories (4 Pages)
RO9801
Audiovox automobile accessories RO9801

For automobile accessories (24 Pages)
5BLCR
Audiovox automobile accessories 5BLCR

For automobile accessories (8 Pages)
ROSIBC
Audiovox automobile accessories ROSIBC

For automobile accessories (5 Pages)